Plenum box 12 mm (BAK12)
Plenum box 12 mm (BAK12). Plenum box 12 mm (BAK12). The junction boxes and plenum boxes are available to match the corresponding trunking widths and heights.
The aluminum frame and cover version with 12 mm edge is suitable for laying parquet, stone or liquid flooring.
Rubber inserts in the frame ensure optimum footfall sound insulation.
The cable outlet at the plenum box is via 2 cable troughs made of impact-resistant, transparent polycarbonate. Brushes or special chrome steel flaps can also be used on request. The junction boxes consist of the same basic elements as the junction boxes with a cover without cable outlet. These can be converted into a junction box at any time if required.
Junction boxes and junction boxes can of course also be installed in the subfloor independently of the underfloor trunking and connected with pipes. Woertz junction boxes and connection boxes can be used as standard from a finished floor height of 62 to 180 mm. With the help of extension bolts and frames, any finished floor height can be precisely adjusted in between. Finished floor heights below 62 mm and above 180 mm can also be achieved with special solutions; our experts will be happy to advise you.
The Woertz installation kits for our standard connection boxes can be ordered empty or equipped with FLF type 13 or type 23 sockets, with pre-wired complete units on blind hole terminals. The installation plates are available in 2 x 3-gang and 2 x 5-gang FLF versions for high and low current.
The aluminum frame and cover version with 12 mm edge is suitable for laying parquet, stone or liquid flooring.
Rubber inserts in the frame ensure optimum footfall sound insulation.
The cable outlet at the plenum box is via 2 cable troughs made of impact-resistant, transparent polycarbonate. Brushes or special chrome steel flaps can also be used on request. The junction boxes consist of the same basic elements as the junction boxes with a cover without cable outlet. These can be converted into a junction box at any time if required.
Junction boxes and junction boxes can of course also be installed in the subfloor independently of the underfloor trunking and connected with pipes. Woertz junction boxes and connection boxes can be used as standard from a finished floor height of 62 to 180 mm. With the help of extension bolts and frames, any finished floor height can be precisely adjusted in between. Finished floor heights below 62 mm and above 180 mm can also be achieved with special solutions; our experts will be happy to advise you.
The Woertz installation kits for our standard connection boxes can be ordered empty or equipped with FLF type 13 or type 23 sockets, with pre-wired complete units on blind hole terminals. The installation plates are available in 2 x 3-gang and 2 x 5-gang FLF versions for high and low current.
Product systems
190
Underfloor system with square plenum box and chrome steel/aluminum junction boxes, edge height 12mm for UFK 200x30 underfloor duct.
191
Underfloor system with square plenum box and chrome steel/aluminum junction boxes, edge height 12mm for UFK 200x40 underfloor duct.
192
Underfloor system with square plenum box and chrome steel/aluminum junction boxes, edge height 12mm for UFK 200x50 underfloor duct.
200
Underfloor system with square plenum box and chrome steel/aluminum junction boxes, edge height 12mm for UFK 300x30 underfloor duct.
201
Underfloor system with square plenum box and chrome steel/aluminum junction boxes, edge height 12mm for UFK 300x40 underfloor duct.
202
Underfloor system with square plenum box and chrome steel/aluminum junction boxes, edge height 12mm for UFK 300x50 underfloor duct.
210
Underfloor system with square plenum box and chrome steel/aluminum junction boxes, edge height 12mm for UFK 400x30 underfloor duct.
212
Underfloor system with square plenum box and chrome steel/aluminum junction boxes, edge height 12mm for UFK 400x50 underfloor duct.