Junction box for flat cable 5G16mm²/5G25mm² IP65 2SI
Article number: 49616/2SI
Junction box with two fuse adapters IP65 for flat cable 5G16mm²/5G25mm² with 3 cable glands M20x1.5 Ø6.0-15.0mm.
| Box Type | Junction boxes |
| Dimensions length x width x height (mm) | 440X85X73 mm |
| Dimensions length x width x height (inch) | 17,32x3,34X2,87 inch |
| Degree of protection | IP65 |
| Metal parts | Korrosionsgeschützt |
| Flat cable contacting type | Piercing-Kontaktierung (Schraube) |
| Number of poles | 5 pole |
| Contacting type | Screw terminal |
| Connection conductor (mm²) | 1,5 - 2,5 mm² |
| Thread cable gland | mit 3 Kabelverschraubungen M20x1.5 (IP68) D= 6.0 mm - 15.0 mm |
| Cable gland (mm) | 6.0-15.0 mm |
| Rated current heavy current part (A) | 16 A |
| Rated voltage heavy current part (V) | 250/400 V |
| Fuse | Three-phase (For fuse 5x20 mm) |
| Operating Temperature (°C) | -15 bis 85 °C |
| Installation temperature min. (°C) | 5 °C |
| Plastic parts | Halogenfrei |
| Material slider/bottom part | Polyamid, schwarz |
| Material housing | Polyamid , schwarz |
| Material hood | Polyamid, schwarz |
| Number Screwdriver Pointed screws Heavy current part | 2 |
| Operating torque of pointed screws for heavy current section (Nm) | 3,7 Nm |
| Number Screwdriver Clamping screws Heavy current part | inbus 1,5 |
| Tightening torque for clamping screw (Nm) | 0,5 Nm |
| Fire load (KWh) | 3,2 kWh |
This product is a member of the following product systems
12000
This system is used for construction temporary offices, open-plan offices, tunnel lighting, shipbuilding, hall lighting, exhibitions, trade fairs and e-mobility installations.
13000
This system is used for construction rovisories, open-plan offices, tunnel lighting, hall lighting, exhibitions, trade fairs and e-mobility installations.