Junction box FK data Bus Code KNX
Article number: 49720
Junction box for flat cable data 2x1.5 mm2 with socket 2-pole code KNX (EIB)
| Box Type | Junction boxes |
| Dimensions length x width x height (mm) | 47x18x23,5 mm |
| Dimensions length x width x height (inch) | 1,85x0,71x0,93 inch |
| Degree of protection | IP20 |
| Metal parts | Korrosionsgeschützt |
| Flat cable contacting type | Piercing-Kontaktierung (Schraube) |
| Number of poles | 2 pole |
| Rated current bus section (A) | 3 A |
| Rated voltage bus part (V) | 50 V |
| Operating Temperature (°C) | -15 bis 85 °C |
| Installation temperature min. (°C) | 5 °C |
| Plastic parts | Halogenfrei |
| Material gate valve/bottom part bus | Polyamid, schwarz |
| Material housing bus | Polyamid, schwarz |
| Material hood bus | Polycarbonat transparent |
| Material slider/bottom part | Polyamid, schwarz |
| Material housing | Polyamid , schwarz |
| Material hood | Polycarbonat, transparent |
| Number Screwdriver Pointed Screws Bus Part | 3 |
| Service torque Pointed screws Bus part (Nm) | 1 Nm |
| Fire load (KWh) | 0,08 kWh |
Product accessories
Plug connections / connection cables for BUS (Code Woertz, Code KNX, Code 3)
| Article number | Stecker_BUS |
This product is a member of the following product systems
1000
This flat cable system is used in building automation, where intelligent devices such as actuators and sensors are connected via a bus.
Typical uses are found with KNX, Dali, SMI, LON, and others. The...
Typical uses are found with KNX, Dali, SMI, LON, and others. The...