Fan coil actuator - KNX - L3
Article number: 49075G/L3
Price on demand
Raptor fan coil actuator - for 2 or 4 pipe system - heating/cooling valves for 2- or 3-point drives, 230 V AC, 2 x 8 A max., 2 x 3-pole socket Code 4 - 3-stage fan, 230 V AC, 16 A max., 5-pin socket Code 1 - 2 potential-free inputs: window contact and condensate monitoring, 2 x 2-pole connectors Code Woertz - 1-phase powered, phase L3 - KNX bus coupler integrated - IP20
Tender text
Fan coil actuator - KNX - L3 (49075G/L3):
Copy
| Dimensions length x width x height (mm) | 170x70x66 mm |
| Dimensions length x width x height (inch) | 6.69x2.76x2.6 inch |
| Degree of protection | IP20 |
| Flat cable contacting type | Piercing contact (knife) EN 60998-2-3 |
| Material | PA 6.6 |
| Configuration mode | S-mode |
| Type of mounting | Flat cable Woertz combi 5G2.5 2x1.5 mm2 |
| Transmission media | KNX TP1 |
| Operating Temperature (°C) | -5 - 45 °C |
| Installation temperature min. (°C) | 10 °C |
| Number of fan stages | max. 3 |
| Switching current of the fan (A) | 16 A |
| Fan plug-in system | Code 1 |
| Plug connection of the fan | 5-pin socket |
| Plug-in connection of the heating/cooling valves | 3-pole socket |
| Contact to flat cable | L3NPE KNX |
| Number of heating valve outputs | 1 |
| Number of cooling valve outputs | 1 |
| Type of valve drive | Electromotive or electrothermal valve actuators 230 V AC |
| Operating voltage | 230 VAC ± 10 % |
| KNX bus voltage (type) | 29 VDC SELV Typ |
| Switching voltage (VAC) | 230 VAC |
| Number of inputs | 2 potentialfreie Binäreingänge |
| Input plug-in system | Code Woertz |
| Plug connection of the inputs | 2-poliger Stecker |
| Switching current per valve output (A) | 8 A |
| Holding current per valve output (mA) | min. 10 mA |
| Plug-in system of the heating/cooling valves | Code 4 |
This product is a member of the following product systems
5730
Various KNX flat cable actuators for fan coils/controllers for heating, cooling and ventilation.