Floor junction box BAK4 to slab formwork
Plenum box BAK4 for fastening to the slab formwork.
The installation of underfloor ducts requires a minimum height of the concrete cover (60mm). If this height is not available, special boxes can be obtained for concreting into the raw slab. After fastening to the formwork, they are connected to each other with underfloor trunking 200 x 40, covered with the temporary protective cover and poured into the concrete up to the top edge.
The installation kit is mounted on the levelable box insert; the opening between the box bottom and the installation plate allows the cable to pass through to the next box. After finished wiring, an aluminum cover with cable trough is attached.
Connection box consisting of:
The installation of underfloor ducts requires a minimum height of the concrete cover (60mm). If this height is not available, special boxes can be obtained for concreting into the raw slab. After fastening to the formwork, they are connected to each other with underfloor trunking 200 x 40, covered with the temporary protective cover and poured into the concrete up to the top edge.
The installation kit is mounted on the levelable box insert; the opening between the box bottom and the installation plate allows the cable to pass through to the next box. After finished wiring, an aluminum cover with cable trough is attached.
Connection box consisting of:
- Enclosure with adjustable feet, with four side openings 202 x 42 mm and a bottom entry tube M50 with temporary one-way steel cover incl. 4 screws
- Enclosure insert made of aluminum, with frame 304 x 304
- Aluminum lid with edge height 4 mm
- 2 cable trays made of polycarbonate crystal clear with transparent filler piece
- Blind cover
- Brush strip
- Cable trough
- Cover
- Housing
- Housing insert
- Installation kit
- Terminal box
Housing made of sendzimir galvanized sheet steel 2mm
with adjustable feet and side openings202x42 mm
and floor insertion tube M50
Adjustment range: 150-220mm
Frame and cover made of aluminum with wooden cover as protection
Edge height 4mm with 2 cable trays
Adjustment range for UB finished floor: 30-80mm
with adjustable feet and side openings202x42 mm
and floor insertion tube M50
Adjustment range: 150-220mm
Frame and cover made of aluminum with wooden cover as protection
Edge height 4mm with 2 cable trays
Adjustment range for UB finished floor: 30-80mm
| Article number | 51760 |
| Base Unit | Piece |
| availability | Delivery according to agreement |
| Weight (g) | 6080 |
Housing made of sendzimir galvanized sheet steel 2mm
with adjustable feet and side openings202x42 mm
and floor insertion tube M50
Adjustment range: 200-270mm
Frame and cover made of aluminum with wooden cover as protection
Edge height 4mm with 2 cable trays
Adjustment range for UB finished floor: 30-80mm
with adjustable feet and side openings202x42 mm
and floor insertion tube M50
Adjustment range: 200-270mm
Frame and cover made of aluminum with wooden cover as protection
Edge height 4mm with 2 cable trays
Adjustment range for UB finished floor: 30-80mm
| Article number | 51761 |
| Base Unit | Piece |
| availability | Delivery according to agreement |
Housing made of sendzimir-galvanized sheet steel 2mm
with adjustable feet and floor insertion tube M50
with temporary steel cover including screws
Adjustment range: 150-220mm
with adjustable feet and floor insertion tube M50
with temporary steel cover including screws
Adjustment range: 150-220mm
| Article number | 51762 |
| Base Unit | Piece |
| availability | Delivery according to agreement |
| Weight (g) | 5980 |
Housing made of sendzimir-galvanized sheet steel 2mm
with adjustable feet and floor insertion tube M50
with temporary steel cover including screws
Adjustment range: 200-270mm
with adjustable feet and floor insertion tube M50
with temporary steel cover including screws
Adjustment range: 200-270mm
| Article number | 51763 |
| Base Unit | Piece |
| availability | Delivery according to agreement |
| Weight (g) | 6075 |
to BAK4, fixing to the ceiling formwork
consisting of:
Frame 304x304 of cast aluminum complete
and screwed collar, height 72mm
of sendzimir galvanized steel sheet 1.5mm
consisting of:
Frame 304x304 of cast aluminum complete
and screwed collar, height 72mm
of sendzimir galvanized steel sheet 1.5mm
| Article number | 51764 |
| Base Unit | Piece |
| availability | Delivery according to agreement |
| Weight (g) | 1670 |
hook-in, to BAK with protective edge 4mm
made of galvanized sheet steel 1.5mm
Color: RAL 7032 pebble gray
equipped, wired and tested with:1 pc. Terminal strip 7x2.5mm ²
3 pcs. sockets FLF 3/5 T13 white 55200
minimum floor height: 67mm
made of galvanized sheet steel 1.5mm
Color: RAL 7032 pebble gray
equipped, wired and tested with:1 pc. Terminal strip 7x2.5mm ²
3 pcs. sockets FLF 3/5 T13 white 55200
minimum floor height: 67mm
| Article number | 52031 |
| Eldas number | 154965057 |
| Base Unit | Piece |
| availability | Delivery according to agreement |
| Weight (g) | 1135 |
hook-in, to BAK with protective edge 4mm
made of galvanized sheet steel 1.5mm
Color: RAL 7032 pebble gray
equipped with:1 pc. Terminal strip 9x2.5mm ²
minimum floor height: 83mm
made of galvanized sheet steel 1.5mm
Color: RAL 7032 pebble gray
equipped with:1 pc. Terminal strip 9x2.5mm ²
minimum floor height: 83mm
| Article number | 52041 |
| Eldas number | 154965247 |
| Base Unit | Piece |
| availability | Delivery according to agreement |
| Weight (g) | 900 |
hook-in, to BAK with protective edge 4mm
made of galvanized sheet steel 1.5mm
Color: RAL 7032 pebble gray
equipped, wired and tested with:1 pc. Terminal strip 9x2.5mm ²
5 pcs. socket FLF 3/5 T13 white 55200
minimum floor height: 83mm
made of galvanized sheet steel 1.5mm
Color: RAL 7032 pebble gray
equipped, wired and tested with:1 pc. Terminal strip 9x2.5mm ²
5 pcs. socket FLF 3/5 T13 white 55200
minimum floor height: 83mm
| Article number | 52051 |
| Eldas number | 154965257 |
| Base Unit | Piece |
| availability | Delivery according to agreement |
| Weight (g) | 1283 |
for modules type bticino
mountable, to BAK with protective edge 4mm
including 2 holding plates
color: RAL 7032 pebble gray
equipped with: 1 pc. Terminal strip 9x2.5mm ²
minimum floor height: 83mm
mountable, to BAK with protective edge 4mm
including 2 holding plates
color: RAL 7032 pebble gray
equipped with: 1 pc. Terminal strip 9x2.5mm ²
minimum floor height: 83mm
| Article number | 52072 |
| Base Unit | Piece |
| availability | Delivery according to agreement |
| Weight (g) | 1170 |
for modules type Legrand Mosaic 45x45mm
mountable, to BAK with protective edge 4mm
color: RAL 7032 pebble gray
equipped with: 1 pc. Terminal strip 9x2.5mm ²
minimum floor height: 83mm
mountable, to BAK with protective edge 4mm
color: RAL 7032 pebble gray
equipped with: 1 pc. Terminal strip 9x2.5mm ²
minimum floor height: 83mm
| Article number | 52074 |
| Base Unit | Piece |
| availability | Delivery according to agreement |
| Weight (g) | 0,95 |
made of die-cast aluminum with edge height 4mm and 2 cutouts for cable trays
| Article number | 51615 |
| Base Unit | Piece |
| availability | Delivery according to agreement |
| Weight (g) | 840 |
made of aluminum 8mm, visible side brushed and colorless anodized
| Article number | 51617 |
| Base Unit | Piece |
| availability | Delivery according to agreement |
| Weight (g) | 1,6 |
| Article number | 51616 |
| Base Unit | Piece |
| availability | Delivery according to agreement |
| Weight (g) | 4510 |
| Article number | 51620 |
| Base Unit | Piece |
| availability | Delivery according to agreement |
| Weight (g) | 2370 |
| Article number | 51613 |
| Base Unit | Piece |
| availability | Delivery according to agreement |
| Weight (g) | 810 |
| Article number | 51614 |
| Base Unit | Piece |
| availability | Delivery according to agreement |
| Weight (g) | 2370 |
made of polycarbonate crystal clear with transparent filling piece
| Article number | 51518 |
| Base Unit | Piece |
| availability | Delivery according to agreement |
| Article number | 51640 |
| Base Unit | Piece |
| availability | Delivery according to agreement |
consisting of:
- Black plastic brush strip
- Chrome steel clamping plate
- Fixing screws
As a replacement instead of the cable tray
- Black plastic brush strip
- Chrome steel clamping plate
- Fixing screws
As a replacement instead of the cable tray
| Article number | 51639 |
| Base Unit | Piece |
| availability | Delivery according to agreement |
| Weight (g) | 18 |