Plastic - junction boxes

High quality plastic junction boxes for electrical installation

Our plastic junction boxes are the perfect approaches for high quality electrical installations. It is flame retardant, impact resistant and splash proof according to IP54. Equipped with a center bolt, a central cover fixing screw and two outside fixing lugs, it provides a solid base for your electrical installation.

The enclosure is corrosion protected and can be equipped with either a riveted-on Woertz rail or a mounting rail. The sheet metal cover has pre-marked entries and sealable cover nuts.
The pivoting mounting lugs are ideal for two screw-type branch terminals with a conductor cross-section of 5x35 mm² or 5x10 mm².
Alternatively, steatite terminal rings can be used with one screw terminals, with spread protection ring made of nickel-plated brass. The protective conductor terminal is secured against self-loosening.

With the IP54 housing DIN 40050 you rely on quality and reliability in electrical installation. It provides a solid basis for your electrical installation and is flexible to use thanks to its many adaptation options.

Product systems

ABS- Housing LiTHOS

1

IP65 International Protection
Color RAL 7035, light gray
Quick-release fastener made of stainless steel, self-retaining
With neoprene seal (available on request, with silicone seal)

Duroplast junction boxes 90x90x54 mm for 7x2.5 mm² for cable glands or entry glands

1

7x2.5 mm²
IP54 International Protection DIN 40050
With two swivel mounting lugs
For steatite clamping rings series 2505 ..., with one-screw terminals, with anti-spread ring, made of nickel-plated brass

Junction boxes with base plate and cover made of thermoplastic for 5x2.5/5x6/5x10 mm²

1

5x2.5 mm²

Plastic junction boxes up to 4x1.5 mm²

1

for dry installations only
two-piece housing with pre-marked knockouts
With one screw terminals, with anti-spread ring, for continuous conductors, made of nickel-plated brass. In steatite base