Raptor blind actuator 2-fold - KNX - L1 - Code 1
Article number: 49072G/L1
Eldas number: 405431127
Price on demand
Raptor blind actuator 2-fold, 3 end switches - 2 x 8 A max. - 2 x 5-pole socket Code 1 - phase L1 - KNX bus coupler integrated - IP20
Tender text
Raptor blind actuator 2-fold - KNX - L1 - Code 1 (49072G/L1):
Copy
| Dimensions length x width x height (mm) | 170x70x66 mm |
| Dimensions length x width x height (inch) | 6.69x2.76x2.6 inch |
| Degree of protection | IP20 |
| Flat cable contacting type | Piercing contact (knife) |
| Material | PA 6.6 |
| Configuration mode | S-mode |
| Type of connection | 5-pin socket |
| Plug-in system | Code 1 |
| Number of channels | 2 |
| Type of mounting | Flat cable Woertz combi 5G2.5 2x1.5 mm2 |
| Transmission media | KNX TP1 |
| Number of end switches | 3 |
| Operating Temperature (°C) | -5 - 45 °C |
| Installation temperature min. (°C) | 10 °C |
| Rated current per channel (A) | 8 A |
| Contact to flat cable | L1NPE KNX |
| Operating voltage | 230 VAC ± 10 % |
| KNX bus voltage (type) | 29 VDC SELV Typ |
| Switching voltage (VAC) | 230 VAC |
| Current for automatic end position detection | min. 150 mA (RMS) |
This product is a member of the following product systems
1160
This flexible system is the basis for decentralized building automation and combines power current and bus data line in a single cable application.
The areas of application are office and public buildi...
The areas of application are office and public buildi...
5710
Various KNX flat cable actuators for blinds control.