Junction box FK data Bus Code 3
Article number: 49721
Junction box for flat cable data 2x1.5 mm2 with socket 2-pole code 3
Box Type | Junction boxes |
Dimensions length x width x height (mm) | 47x18x23,5 mm |
Dimensions length x width x height (inch) | 1,85x0,71x0,93 inch |
Degree of protection | IP20 |
Metal parts | Korrosionsgeschützt |
Flat cable contacting type | Piercing-Kontaktierung (Schraube) |
Number of poles | 2 pole |
Rated current bus section (A) | 3 A |
Rated voltage bus part (V) | 50 V |
Operating Temperature (°C) | -15 bis 85 °C |
Installation temperature min. (°C) | 5 °C |
Plastic parts | Halogenfrei |
Material gate valve/bottom part bus | Polyamid, schwarz |
Material housing bus | Polyamid, schwarz |
Material hood bus | Polycarbonat transparent |
Material slider/bottom part | Polyamid, schwarz |
Material housing | Polyamid , schwarz |
Material hood | Polycarbonat, transparent |
Number Screwdriver Pointed Screws Bus Part | 3 |
Service torque Pointed screws Bus part (Nm) | 1 Nm |
Fire load (KWh) | 0,08 kWh |
Product accessories

Plug connections / connection cables for BUS (Code Woertz, Code KNX, Code 3)
Article number | Stecker_BUS |
This product is a member of the following product systems

1000
This flat cable system is used in building automation, where intelligent devices such as actuators and sensors are connected via a bus.
Typical uses are found with KNX, Dali, SMI, LON, and others. The...
Typical uses are found with KNX, Dali, SMI, LON, and others. The...